SALES

 8 (800) 500-07-22

Request a call back

SST-B TRANSET fiberglass reinforcing meshes
SST-B TRANSET fiberglass reinforcing meshes
SST-B TRANSET fiberglass reinforcing meshes
SST-B TRANSET fiberglass reinforcing meshes
SST-B TRANSET fiberglass reinforcing meshes

SST-B TRANSET fiberglass reinforcing meshes

Ask question The request for delivery of

  • SST-B TRANSET  fiberglass reinforcing mesh is a mesh of glass fibers, which is impregnated with a compound based on bituminous or bitumen-polymer primers.

  •  Physical and mechanical properties

     

    Property Unit SST-B 2.5х2.5-130

    SST-B

    3.4x3.4-120

    Surface weight g/m² 130±17 120±16
    Loss on ignition % 10-20 10-20
    Tensile strength, warp, not less than N/5 cm 900 1000
    Size of a square mesh side mm 2.5 3.4
    Standard roll size      
    width cm

    22.5±0,5

    45±0,5

    45+1.0
    length m 620+0.5 610+0.5

     

    Manufacture of the material with other physical and mechanical properties is accepted upon agreeing about with a consumer.

     

  • Typical application:

    • the mesh is intended for reinforcement of rolled materials, serves as adhesive undercoat of polymer strips and combined protective corrosion-resistant coatings based on bituminous, bitumen-polymer or asphalt-resinous materials,
    • is intended for reinsulating pipes of oil&gas products lines up to 1420 mm in diameter inclusive during overhaul repairs, with a temperature of a flowing product not exceeding +35°С.

     

    A 2.5х2.5mm-pitch mesh is used for reinforcement of rolled materials, a 3.4х3.4mm-pitch mesh is used for reinforcement of coverings.