- Home
-
Products
- Glassfiber fabrics
- Geosynthetics
-
Сomposite materials
- STEKON fiber-reinforced polymer rebar
- STEKON FRP polymer grid
- STEKON flexible link
- PULGLASS unidirectional fiberglass profiles
- PULGLASS unidirectional cylindrical fiberglass rods
- MRP MOBISTEK Mobile Road Pavements
- STEKON tanks and sewage pumping stations for storage and pumping liquids
- STEKON waste water treatment facilities
- STEKON fiberglass pipe culverts
- Finished composite products
- Construction meshes
- Industrial meshes
- Insulation of pipelines
- Twisted yarns and rovings
- Glass-filled polymer compounds
- Special offers
-
Markets
Machine building industry
Construction
Road construction
Oil industry
- News
- About company
- Contacts
- Home
- Products
- Сomposite materials
- PULGLASS unidirectional cylindrical fiberglass rods
PULGLASS unidirectional cylindrical fiberglass rods
-
PULGLASS unidirectional fiberglass rods are made by continuous pulling of glass-strands roving through a forming bushing.
-
Physical and mechanical properties
Property Unit SSCO
-6 AE
SSCO
-8 AE
SSCO
-10 AE
SSCO
-12 AE
SSCO
-15 AE
SSCO
-16 AE
SSCO
-20 AE
SSCO
-22 AE
SSCO
-26 AE
SSCO
-36 AE
SSCO
-46 AE
SSCO
-80 AE
Nominal diameter mm 6+0.3
-0.3
8+0.3
-0.3
10+0.2
-0.2
12+0.2
-0.2
15+0.4
-0.1
16+0.2
-0.1
20+0.4
-0.1
22+0.5
-0.1
26+0.3
-0.3
36+0.5
-0.1
46+0.2
-0.5
80+0.2
-0.5
Weight of a linear meter, kg 0.062 0.108 0.150 0.220 0.385 0.410 0.630 0.750 1.200 2.030 3.500 10.75 Density kg/m3 1,800-2,150 Tensilestressatbreak MPa >800 >700 Dielectric strength along fibres at 50Hz under room conditions kVeff/
mm
>4 >4.5 >4.0 Water absorption capacity within 24 hrs <0.03%
Impact viscosityacross fibers>265 kJ/m2
Ultimate flexural strengthacross fibers >700 MPa
Resistance to short-duration heating for 30 min >160С
Surface resistivity >1.1012 Ohm
Manufacture of the material with other physical and mechanical properties is accepted upon agreeing about with a consumer.
-
-
Typical application:
unidirectional fiberglass rods are used in polymer insulators and as structural components of signaling fences.
-
The rods are intended for long-time service at an ambient air temperature ranging from -60С to +80С with admissible short-duration heating up to +160С under conditions of normal and high humidity.
-
Regulatory documents:
- Technical specifications TU 6-48-00204961-35-96
