STEKON FRP polymer grid
-
Production of STEKON composite reinforcing mesh based on alkali-resistant glass fiber Advantex with subsequent impregnation.
The reinforcing mesh consists of bars arranged in a rigid mesh frame which is impregnated and fastened at the intersections with a polymer binding agent.
Standard typical size is as follows: 1 or 2 meters in width cut to 1x2 m sheets, or in rolls (according to a preliminary order).
High strength of composite rods
Corrosive resistance
Low weight (easier and efficient transportation, safe installation)
Low thermal conductivity (no cold bridges).Typical application:
- reinforcement of sand cement screeds
- reinforcement of brickworks
- reinforcement of bilayer walls containing different materials (brick, gas-concrete- breeze-, claydite-concrete blocks and others)
- reinforcement of facing bricks
- reinforcement of ferro-concrete articles;
- reinforcement of thick plaster layer;
- reinforcement of asphalt concrete during construction of roads
- reinforcement of soil (embankments, slopes, retaining walls, sides of ditches and pits).
-
-
SТО 00204961-028-2016
Certificate of conformity STO
Physical and mechanical properties
* Recommended replacement of rod diameters is based on comparison of tensile parameters (1000 MPa in terms of tension). In basic fields of application, such as screeds, the grid serves as construction reinforcement, so other parameters are not taken into account.
| ||||||||||||||||
