Constructive woven fabrics

Constructive woven fabrics are made by interweaving twisted yarns using standard weaving machinery. There can be different weaves of the fabircs: plain, satin, twill, and etc.

Physical and mechanical properties

Property		Unit	Т-10P-14	Т-13P	Т-13P-76	Т-11P	Т-11П-GVS-9
Type of weave			Satin 8/3	Plain	Plain	Satin 5/3 or satin 8/3	Satin 5/3 or satin 8/3
Surface weight		g/m²	290±5%	285±5%	285±5%	385±5%	385±5%
Thickness		mm	0.23±15%	0.27±15%	0.27±15%	0.30±15%	0.30±15%
Tensile strength	warp	N/2.5 cm	2940	1764	1764	2744	1764
Tensile strength	weft	N/2.5 cm	1568	1176	1274	1568	931
Loss on ignition		%	≥0.3	0,5-1,5 – silane sizings ≤2 paraffin emulsion			≤0.5
Reference documents			GOST 19170-2001

Manufacture of the material with other physical and mechanical properties is accepted upon agreeing about with a consumer.

Typical application:
- as reinforcing material in manufacture of glass-fibre reinforced plastics with increased strength properties,
- as cover materials in thermal insulation, manufacture of roofing and other construction purposes.
- high strength at low weight,
- corrosion-resistant,
- not bio-degradable,
- inert to electricity,
- high chemical resistance,
- eco-friendly,
- non-flammable,
- operating temperature ranging from -200°С to +550°С.
Reference documents:
- GOST 19170-2001
- TU 13.20.46-029-00205009-2016
- TU 5952-046-00204961-97