You are here:  
  1. Home
  2. Products
  3. Geosynthetics
  4. HIGHWAY geogrids
HIGHWAY geogrids
 HIGHWAY geogrids
 HIGHWAY geogrids
 HIGHWAY geogrids

HIGHWAY geogrids

Ask a question
Request
ce logo3

Specification (Download)

  • HIGHWAY geogrids are two systems of yarns inteknit with a third one, a knitting yarn, and impregnated with polymer dispersions.

    The geogrids may be made of glass, polyester or basalt yarns.

    • Physical and mechanical properties

    Property Unit SSNP 50/50 SSNP 100/100 PS 50/50 PS 100/100 GB 50/50 GB 100/100
    Raw material   Glass fiber Polyester fiber Basalt fiber
    Surface weight g/m² ≥250 ≥500 ≥200 ≥400 ≥200 ≥350
    Size of a square mesh side mm, ±2mm 25x25 - 40х40 20х20 - 50х50 25x25 - 70х70
    Tensile strength
    warp kN/m ≥50 ≥100 ≥50 ≥100 ≥50 ≥100
    weft kN/m ≥50 ≥100 ≥50 ≥100 ≥50 ≥100
    Elongation at maximum load
    warp % ≤4 ≤4 ≤13 ≤13 ≤4 ≤4
    weft % ≤4 ≤4 ≤13 ≤13 ≤4 ≤4
    Standard roll size
    width m ≤4 ≤5 ≤5
    length m 50/75/100 50/75/100 50/75/100

    Manufacture of the material with other physical and mechanical properties is accepted upon agreeing about with a consumer.

  • Typical application:

    As a reinforcing interlayer to increase rated performance of asphalt-concrete layers in road dressing, for the purpose of decelerating generation, evolution and extension of cracks.

    The grids obstruct evolution of rutting and generation of bloats and shifts on pavement, extend service life and performance figures of pavement.

    • the geogrids are impregnated with complex bituminous-polymer compaunds to improve adhesive behavior,
    • the grids are manufactured using European equipment.

Similar products

Neftegaz GRUNTSET geogrids
Neftegaz GRUNTSET geogrids
BENSTEN K masonry grids
BENSTEN K masonry grids
SST-B TRANSET fiberglass reinforcing meshes
SST-B TRANSET fiberglass reinforcing meshes
GRINKOD multiaxial rockshield
GRINKOD multiaxial rockshield