SST-B TRANSET fiberglass reinforcing meshes

SST-B TRANSET fiberglass reinforcing mesh is a mesh of glass fibers, which is impregnated with a compound based on bituminous or bitumen-polymer primers.

Physical and mechanical properties

Property	Unit	SST-B 2.5х2.5-130	SST-B 3.4x3.4-120
Surface weight	g/m²	130±17	120±16
Loss on ignition	%	10-20	10-20
Tensile strength, warp, not less than	N/5 cm	900	1000
Size of a square mesh side	mm	2.5	3.4
Standard roll size
width	cm	22.5±0,5 45±0,5	45+1.0
length	m	620+0.5	610+0.5

Manufacture of the material with other physical and mechanical properties is accepted upon agreeing about with a consumer.

Typical application:
- the mesh is intended for reinforcement of rolled materials, serves as adhesive undercoat of polymer strips and combined protective corrosion-resistant coatings based on bituminous, bitumen-polymer or asphalt-resinous materials,
- is intended for reinsulating pipes of oil&gas products lines up to 1420 mm in diameter inclusive during overhaul repairs, with a temperature of a flowing product not exceeding +35°С.
A 2.5х2.5mm-pitch mesh is used for reinforcement of rolled materials, a 3.4х3.4mm-pitch mesh is used for reinforcement of coverings.
Regulatory documents:
- ТU 2296-010-00205009-2012