PULGLASS unidirectional cylindrical fiberglass rods
PULGLASS unidirectional cylindrical fiberglass rods
PULGLASS unidirectional cylindrical fiberglass rods
PULGLASS unidirectional cylindrical fiberglass rods
PULGLASS unidirectional cylindrical fiberglass rods

PULGLASS unidirectional cylindrical fiberglass rods

  • PULGLASS unidirectional fiberglass rods are made by continuous pulling of glass-strands roving through a forming bushing.

  • Physical and mechanical properties

     

     

     Property  Unit

    SSCO

    -6 AE

    SSCO

    -8 AE

    SSCO

    -10 AE

    SSCO

    -12 AE

    SSCO

    -15 AE

    SSCO

    -16 AE

    SSCO

    -20 AE

    SSCO

    -22 AE

    SSCO

    -26 AE

    SSCO

    -36 AE

    SSCO

    -46 AE

    SSCO

    -80 AE

    Nominal diameter mm

    6+0.3

       -0.3

    8+0.3

        -0.3

    10+0.2

           -0.2

    12+0.2

           -0.2

    15+0.4

           -0.1

    16+0.2     

     -0.1

    20+0.4    

       -0.1

    22+0.5  

        -0.1

    26+0.3

           -0.3

    36+0.5  

        -0.1

    46+0.2        

    -0.5

    80+0.2

           -0.5

    Weight of a linear meter, kg   0.062 0.108 0.150 0.220 0.385 0.410 0.630 0.750 1.200 2.030 3.500 10.75
    Density kg/m3 1,800-2,150
    Tensilestressatbreak MPa ≥800 ≥700
    Dielectric strength along fibres at 50Hz under room conditions

    kVeff/

    mm

    ≥4 ≥4.5 ≥4.0

    Water absorption capacity within 24 hrs ≤0.03%

    Impact viscosityacross fibers≥265 kJ/m²

    Ultimate flexural strengthacross fibers ≥700 MPa

    Resistance to short-duration heating for 30 min ≥160°С

    Surface resistivity ≥1.1012 Ohm 

    Manufacture of the material with other physical and mechanical properties is accepted upon agreeing about with a consumer.

     

     

  • Typical application:

    unidirectional fiberglass rods are used in polymer insulators and as structural components of signaling fences.

  • The rods are intended for long-time service at an ambient air temperature ranging from -60°С to +80°С with admissible short-duration heating up to +160°С under conditions of normal and high humidity.