Voluminized roving
 Voluminized roving

Voluminized roving

Ask a question
Request

 Specification (Download)

  • Voluminized roving is a roving drawn through an air-jet nozzle that imparts continuous bulk.

    •  

    Physical and mechanical properties

     

    Property Unit  ЕС11-220Т-silane ЕС14-320Т-silane ЕС16-630Т-silane ЕС14-720Т-silane Т30 17-1230Т-silane
    Type of glass   E E Е Е Advantex
    Linear density tex 220±5% 320±5% 630±5% 720±5% 1230±5%
    Tensile strength kgf ≥1.5 ≥3.0 ≥4.0 ≥4.5 ≥5.0
    Mass content of sizing agent % ≤0.55 ≤0.55 ≤0.55 ≤0.55 ≤0.55
    Mass content of moisture % ≤0.3 ≤0.3 ≤0.3 ≤0.3 ≤0.3
    Type of sizing agent   silane silane silane silane silane
    Width of voluminized roving mm ≥3 ≥4 ≥6 ≥7 ≥10

     

    Manufacture of the material with other physical and mechanical properties is accepted upon agreeing about with a consumer.

     

     

     

  • Typical application:

    • Glass voluminized roving is used for manufacture of filled composites and friction articles, woven and nonwoven materials.
    • Voluminized glass fibers are widely used in such fields as air filtration, thermal insulation, manufacture of filtering fabrics.
    • Voluminized rovings substitute for asbestos in many fields.
    • Voluminization improves performance and adhesive characteristics, hygienic properties of synthetic fabrics.
    • Texturized and voluminized glass yarns can save greater amount of air than single yarns thus providing better insulating properties.
    • Fabrics of voluminized fibers are notable for high strength, low density and good insulating properties, thermal stability, low thermal conductivity, high speed of filtration, low shrinkage, problematic deformation.

Similar products

BENSTEN K masonry grids
BENSTEN K masonry grids
SST-B TRANSET fiberglass reinforcing meshes
SST-B TRANSET fiberglass reinforcing meshes
STEKON fiber-reinforced plastic rebar
STEKON fiber-reinforced plastic rebar
STEKON FRP polymer grid
STEKON FRP polymer grid