Twisted glass mulfifilament yarns

The yarns are made of E-type aluminum-borosilicate glass.

Typical application: manufacture of various fabrics, nonwovens, electroinsulation of winding and hookup wires, manufacture of composites based on epoxy, epoxyphenol and other binding agents.

Physical and mechanical properties

Property*	Resulting nominal linear density	Resulting nominal linear density	Turns per meter in the twist	Specific tensile strength	Siz-ing	Loss on ignition
Unit	µm	tex (+5% / -7%)	turns	mN/tex (gf/tex)	-	%
EC 6 26S100-14	6	26	100 (±15%)	590 (60)	№14	≥0,3
ЕС 6 34 S50-76	6	34	50 (±20%)	590 (60)	№76	0,7-1,3
ЕС 6 34х2 Z80	6	68	80 (±15%)	590 (60)	ПЭ	0,9-1,9
ЕС 6 34х2 Z80-34	6	68	80 (±15%)	590 (60)	№34	0,7-1,3
ЕС 8 44 S50	8	44	50 (±20%)	470 (48)	ПЭ	0,9-1,9
ЕС 9 52 S50	9	52	50 (±20%)	410 (42)	ПЭ	0,9-1,9
ЕС 9 52 S90	9	52	90 (±15%)	410 (42)	ПЭ	0,9-1,9
ЕС 9 52х2 Z100-76	9	104	100 (±15%)	410 (42)	№76	0,7-1,3
ЕС 9 52х2Z 100***	9	104	100 (±15%)	410 (42)	ПЭ	0,9-1,9
ЕС 9 68 S50	9	68	50 (±20%)	410 (42)	ПЭ	0,9-1,9
ЕС 9 68 S50-34	9	68	50 (±20%)	410 (42)	№34	0,7-1,3
ЕС 9 104 S50	9	104	50 (±20%)	410 (42)	ПЭ	0,9-1,9
ЕС 9 136 S50-34	9	136	50 (±20%)	410 (42)	№34	0,7-1,3
ЕС 10 84 S50	10	84	50 (±20%)	370 (38)	ПЭ	0,9-1,9
EC 10 84x2 Z150	10	168	150 (±10%)	370 (38)	ПЭ	0,9-1,9
ЕС 10 84х3Z 250**	10	252	250 (±10%)	370 (38)	ПЭ	0,9-1,9
ЕС 10 160 S50-34	10	160	50 (±20%)	370 (38)	№34	0,7-1,3

* Yarn twist direction: Z – right-hand, S – left-hand. ** 3-fold *** 2-fold

Unit of output of the yarn is a bobbin. Weight of yarn on a bobbin is not less than 2,000g.

Manufacture of the material with other physical and mechanical properties

is accepted upon agreeing about with a consumer.

Typical application:
- manufacture of various fabrics, nonwovens,
- electroinsulation of winding and hookup wires,
- manufacture of composites based on epoxy, epoxyphenol and other binding agents.
Regulatory documents:
- GOST 8325-2015